Opera Lautsprecher

In Venetien erfüllt sich ein Grandseigneur der Italienischen HiFi–Szene einen audiophilen Lebenstraum - Giovanni Nasta gründet die Lautsprecher-Manufaktur Opera.
Die Ursprünge gehen allerdings schon auf die frühen 1980er Jahre zurück, damals entstand eine Symbiose aus zwei audiophilen Kulturen, der italienischen und der englischen. Der erste Lautsprecher trug den Namen Caruso und war der Vorläufer einer Reihe von Produkten, deren Namenspatrone die großen Stimmen aus Oper und Operette waren und sind. Giovanni ist bis zum heutigen Tage federführend, ist stets bemüht, dieses Ideal in seinen Produkten wiederzufinden - in der Schönheit des Klanges, aber auch in der Eleganz des Designs und der Qualität der Verarbeitung.
Bei Opera kommen traditionelle perfekte, italienische Holzverarbeitung und modernste akustische Technologien zusammen.
Opera stellt Lautsprecher her, die unter Verwendung von hochwertigen Materialien sorgfältig nach den grundlegenden Prinzipien der akustischen Wissenschaft gefertigt werden. Das war schon vor zwanzig Jahren beim ersten Caruso so und daran hat sich nichts geändert, nur dass heute eine breite Palette von Lautsprechern für ein breites Publikum, für jede Einsatzart und für jedes Budget zur Verfügung stehen.

Wir wünschen Ihnen viel Freude und Genuss beim Musik-Erleben mit Opera-Lautsprechern !
...
"Wo der schöne Schein stimmt"

Wunderschöne Lautsprecher mit sensationellem Preis-Leistungs-Verhältnis.
Wo finden Sie höchstwertige skandinavische Chassis von Scan Speak und Seas mit dieser Gehäuseverarbeitung zu solchen Preisen ?

Opera hat ein sehr kleines Produktsortiment, aber jeder Lautsprecher ist in seiner Preisregion ein Preis-Leistungs-Überflieger.
ART & VOICE Tip !!!

Opera Prima 2015, Kompaktlautsprecher, echt fein !
Opera Prima 2015, Kompaktlautsprecher, echt fein !
Opera Prima 2015, Kompaktlautsprecher, echt fein !
Opera Prima 2015, Kompaktlautsprecher, echt fein ! Description This diffuser is equipped with a couple of reflex ducts on the rear side which may be closed with two polyurethane cylinders. Other  improvement has been made on then cabinet    (more rigid) and the cross-over. Driver The new 7” woofer is a custom model, made by Scanspeak, for the whole new Classica series. This woofer has an excellent performance in the mid frequencies enough to be used as a midrange in the Quinta model. It is equipped with an aluminum diaphragm,  a 38 mm coil (two-layer, CCWA wire) with aluminium former immersed in a suitably shaped air gap. There is also a metal ring around the pole piece to control the flux variations. The basket is die-cast for maximum stiffness. Compared to its predecessor the volume displacement is increased by a significant 25%. The rigid aluminium diaphragm is free from  subharmonics and from transverse modes and perfectly reproduces the lower frequencies. The two woofers, connected in parallel, share the same 40 liters enclosed volume. The tweeter, a D26 series made by Scanspeak, has a one inch high quality treated soft dome, double magnet, decompression chamber, ferrofluid, aluminum flange and a one mm. peak to peak linear excursion (the double of a conventional tweeter). The frequency response extends to 30kHz (0 dB) and 40 kHz are reproduced 6 dB down. The resonant frequency is about 860 Hz which makes this tweeter insensitive to vibrations from other loudspeakers (if any due to the heavy 30 mm MDF the front panel).Crossover The crossover circuit, two ways and a half, is divided into two different boards placed at suitable distance from each other, to reduce the effects of mutual inductance of coils. The tweeter high-pass sections is designed to minimize the microphonic effect (something rarely done).  The capacitors used in the signal path have been carefully selected. This also contributes to the stability of the virtual central channel to create a stable and precise soundstage. Cabinet The cabinet re-proposes, in the upper part, the curvature of the Malibran model. The front panel, MDF (30 mm thick) is wide enough to accommodate the loudspeakers, has rounded edges and is covered in leather that also acts as a seal for the speaker. The sides of the cabinet are veneered with real wood and finely polished. The structure is further stiffened by internal bracing. Inside the cabinet there are two layers of pyramidal shaped, 10 cm thick, polyurethane which absorb the rear radiation of the woofers. As a consequence Consistency and Clarity are the hallmarks of the sound of this speaker. Opera Quinta is equipped with strong iron bars for wheels or spikes.The four externel connectors (Quinta is designed for bi-wiring) are the traditional gold-plated brass connectors, the same for all Opera speakers, including our top models. They accept any kind of termination providing a safe and effective electrical and mechanical contact.The insensitivity of the closed box system to sub-sonic frequencies makes our diffusers specially suited to the reproduction of analog records (LPs). The Opera Seconda is also suited to be used as front and / or rear channel in home theater systems: with two pairs of Opera Seconda you can get an Home Theater System that requires no center channel and no sub-woofer.Particular attention has been paid to the electrical impedance curve to get a diffuser less sensitive to the quality of the cables and amplifier (tube or solid state). Opera Seconda is a true 4 ohm nominal impedance system that meets the DIN 45500 standards (minimum impedance greater than 3.2 ohms) that can be driven by any amplifier suited for 4 ohm nominal load.Opera Seconda is a final diffuser: with full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers.   Technical Specs Dimension: 33 x 20 x 28 cm (h x w x d) Weight: 19Kg (pair) System: Stand or bookshelf , reflex Loudspeakers: 1 woofer 6.5” aluminum diaphragm Number of ways: 2 Frequency response: 40-20000 Hz Cross-over: 12 dB/oct low pass, 12 dB/oct high pass, Frequency 2000Hz Amplifier: from 10 watt without clipping Sensitivity: 91 db 2.83 Vrms at 1 mt Nominal impedance: 4 ohm (Z min > 3.5 ohm) Power: 70 watt RMS Room positioning(on stand): 30 cm from side

875,00 €*
Opera Grand Mezza MK II, A&V-Highlight !
Opera Grand Mezza MK II, A&V-Highlight !
Opera Grand Mezza MK II, A&V-Highlight !
Opera Grand Mezza MK II (Paarpreis) Obviously this does not preclude the use of Grand Opera Mezza 2012 with even the most extensive and powerful amplifiers (up to over 200 Watts RMS per channel) provided the amplifier is of good quality and is protected against excessive clipping.The Opera Grand Mezza 2012, compared to the previous 2007 model, has been completely revamped. It is a floor-standing three-way column speaker that is reflex loaded. There are two 5" long-throw SEAS woofers with polypropylene cones and a 5” SEAS midrange driver. The cones are made from double-treated paper. The tweeter, by Scanspeak, is the same we use on the more expensive Seconda and Quinta 2011 models. Impedance for the Grand Mezza is a nominal 4 ohms.The Opera Grand Mezza 2012 is a comprehensive and versatile speaker system suitable for the most demanding musical programs, and it can be used in sophisticated home theater systems as well. Technical Specs Dimensions: 20 x 100 x 35 cm ( LxHxD) Weight: 19kg System: 3 ways, floorstanding, reflex with front firing duct Finiture: pelle Speakers: 2x5” woofer (Seas) polypropylene, 1x5” midrange (Seas) double trated cone Ways: 2 Frequency response: 40 -20000 Hz Cross-over: Parallel, low pass : 12 dB/oct between woofer ond midrange. Cascaded Low pass at 2000 Hz, High pas:  12 dB/oct (tweeter) Cross-over frequency: 200 & 2000 Hz Power: 120 watt RMS Amplifier: 10 Watt RMS o più senza clipping Sensibilità: starting from 10 Watt RMS or more – far from clipping condition Nominal Impedance: 4 ohm (Z min > 4 ohm) Potenza Massima: 120 watt RMS In room position: far from room angles

2.399,00 €*
Opera Seconda SE, Standlautsprecher
Opera Seconda SE, Standlautsprecher
Opera Seconda SE, Standlautsprecher
Opera Seconda SE, Standlautsprecher (Paarpreis) Describtion This diffuser is equipped with a couple of reflex ducts on the rear side which may be closed with two polyurethane cylinders. Other  improvement has been made on then cabinet    (more rigid) and the cross-over. Driver The new 7” woofer is a custom model, made by Scanspeak, for the whole new Classica series. This woofer has an excellent performance in the mid frequencies enough to be used as a midrange in the Quinta model. It is equipped with an aluminum diaphragm,  a 38 mm coil (two-layer, CCWA wire) with aluminium former immersed in a suitably shaped air gap. There is also a metal ring around the pole piece to control the flux variations. The basket is die-cast for maximum stiffness. Compared to its predecessor the volume displacement is increased by a significant 25%. The rigid aluminium diaphragm is free from  subharmonics and from transverse modes and perfectly reproduces the lower frequencies. The two woofers, connected in parallel, share the same 40 liters enclosed volume. The tweeter, a D26 series made by Scanspeak, has a one inch high quality treated soft dome, double magnet, decompression chamber, ferrofluid, aluminum flange and a one mm. peak to peak linear excursion (the double of a conventional tweeter). The frequency response extends to 30kHz (0 dB) and 40 kHz are reproduced 6 dB down. The resonant frequency is about 860 Hz which makes this tweeter insensitive to vibrations from other loudspeakers (if any due to the heavy 30 mm MDF the front panel). Crossover The crossover circuit, two ways and a half, is divided into two different boards placed at suitable distance from each other, to reduce the effects of mutual inductance of coils. The tweeter high-pass sections is designed to minimize the microphonic effect (something rarely done).  The capacitors used in the signal path have been carefully selected. This also contributes to the stability of the virtual central channel to create a stable and precise soundstage. Cabinet The cabinet re-proposes, in the upper part, the curvature of the Malibran model. The front panel, MDF (30 mm thick) is wide enough to accommodate the loudspeakers, has rounded edges and is covered in leather that also acts as a seal for the speaker. The sides of the cabinet are veneered with real wood and finely polished. The structure is further stiffened by internal bracing. Inside the cabinet there are two layers of pyramidal shaped, 10 cm thick, polyurethane which absorb the rear radiation of the woofers. As a consequence Consistency and Clarity are the hallmarks of the sound of this speaker. Opera Quinta is equipped with strong iron bars for wheels or spikes.The four externel connectors (Quinta is designed for bi-wiring) are the traditional gold-plated brass connectors, the same for all Opera speakers, including our top models. They accept any kind of termination providing a safe and effective electrical and mechanical contact.The insensitivity of the closed box system to sub-sonic frequencies makes our diffusers specially suited to the reproduction of analog records (LPs). The Opera Seconda is also suited to be used as front and / or rear channel in home theater systems: with two pairs of Opera Seconda you can get an Home Theater System that requires no center channel and no sub-woofer. Particular attention has been paid to the electrical impedance curve to get a diffuser less sensitive to the quality of the cables and amplifier (tube or solid state). Opera Seconda is a true 4 ohm nominal impedance system that meets the DIN 45500 standards (minimum impedance greater than 3.2 ohms) that can be driven by any amplifier suited for 4 ohm nominal load.Opera Seconda is a final diffuser: with full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers.   Technical Specs Size: 102 x 24.5 x 43 cm (h x w x d) Net Weight: 45kg System: Floor-standing column -  Closed box Finiture: pelle Loudspeakers: 2 x 7” woofer  -  Alu cone, 1 x 1” Scanspeak  Tweeter  D26, Silk, decompressed, Magnetic fluid Ways: 2 and a half Frequency response: 30-30000 Hz Cross-over: Woofer: 12 dB low pass Tweeter : 12 dB high pass Cross-over frequency: 2200 Hz approx Power:140 watt RMS Amplifier: From 10 to 200 Watt RMS or more – With out Clipping Sensitivity: 89 dB/2.83Vrms/1 meter Nominal Impedance 4 ohm (minimo > 3.2)

3.800,00 €*
Opera Callas, Kompaktlautsprecher, A&V-Highlight !
Opera Callas, Kompaktlautsprecher, A&V-Highlight !
Opera Callas, Kompaktlautsprecher, A&V-Highlight !
Opera Callas, Kompaktlautsprecher (Paarpreis) Mit der Callas eröffnet Opera Musikliebhabern neue klangliche Dimensionen in punkto räumlicher Abbildung, Dynamik, Timbre sowie ermüdungsfreiem Hören. Sie ist ein kompakter Zwei-Wege-Lautsprecher, konzipiert für die Aufstellung auf dem Standfuß oder im Regal. Bei der Gestaltung des Gehäuses wurde besondere Sorgfalt auf die Beseitigung von internen Reflexionen gelegt. Die neue Callas ist rückseitig mit einem Schalter ausgestattet, um den Frequenzbereich zwischen 300 Hz und 3000 Hz einzustellen. Dadurch wird die Flexibilität der Lautsprecher bei der Aufstellung deutlich erhöht. Kraft und Dynamik bei niedrigen Frequenzen sind angesichts der Größe des Lautsprechers erstaunlich. Technische Daten System: two ways, stand mounting, Reflex with rear duct, bi-wiring Front firing Loudspeakers: 1 x 7” long-throw woofer with polypropylene re-cooked cone and phase plug, 1 x 1” Scanspeak 9700 tweeter without ferrofluid and double decompression chamber Frequency response: 40-25000 Hz Cross-over: 12 dB/ott. For woofers; 18 dB/ott for the front tweeter Cross-over frequency: 300 – 2000 Hz approx Cross-over frequency: 2000 Hz (aprox.) Max Power: 100 Watt (without clipping) for musical programs with crest factor about 5 Amplifier: Starting from 10 Watt RMS Sensitivity: 89 dB/2.83 Volt/1 meter Nominal Impedance: 4 ohm (Zmi >3 ohm) Size: 42 x 24,5 x 42 cm (HxLxP) Weight: 15kg each

4.450,00 €*
Opera Quinta SE, Standlautsprecher vom Feinsten, A&V-Highlight !!
Opera Quinta SE, Standlautsprecher vom Feinsten, A&V-Highlight !!
Opera Quinta SE, Standlautsprecher vom Feinsten, A&V-Highlight !!
Opera Quinta SE (Paarpreis) Basierend auf dem Erfolgsmodell Seconda wurde die Quinta SE um eine komplett eigenständige Mittensektion erweitert.Trotz der Verwendung von luxuriösen Materialien und qualitativ sehr hochwertigen Lautsprecherchassis bietet diese Reihe ein optimales Preis-Leistungs-Verhältnis.Die Gehäuse sind aus MDF und es stehen hochwertige Echtholz-Furniere zur Auswahl.Alle Modelle sind mit von SEAS oder Scan-Speak speziell für Opera gefertigten Treibern bestückt.Die Frontblende, die Rückseite und die obere und untere Gehäuseplatte sind mit Leder überzogen. Die Verarbeitungsqualität ist hervorragend, wie sie es von Opera erwarten dürfen. Scan-Speak 9700 Hochtöner mit Texti kalotte, fluidgedämpft !! Zwei 7-Zoll Tieftöner von Seas mit Aluminiummembran 7-Zoll Mitteltöner von Seas mit HQ-Polypropylen-Membran mit ABS-Phaseplug 3-Wege Standlautsprecher Wirkungsgrad: 91 dB/1 Watt/1 Meter Größe: 24,5 x 110 x 43 cm (BxHxT) Gewicht: 51 Kg Opera Audio Quinta The new Quinta Model, although part of the Classica series, makes an important qualitative leap in the absolute quality of the reproduction and in the “value for money” that becomes even more competitive.Opera Quinta is a final diffuser: it has full extension of the low frequency, capable of reproducing important volumes of sound, easy to insert into the room, with a clear and defined midrange and an high frequency reproduction typical of our top speakers. Technical Specs Size: 110 x 24.5 x 43 cm   43 x 9.5 x 17 inches (hxwxd) System: Floor-standing column -  Reflex Finiture: pelle Loudspeakers: 2 x 7” woofer  -  Alu cone,1 x 7” midrange - annealed polypropylene and ABS phase plug, 1 x 1” Scanspeak  9700 Tweeter Ways: 3 Frequency response: 30-30000 Cross-over: Woofer: 18 dB low pass, Midrange: 12 dB Low pass and high pass, Tweeter : 18 dB high pass Crossover frequency: 300 – 2000 Hz approx Power: 140 watt RMS Amplifier: From 10 to 200 Watt RMS or more – With out Clipping Sensitivity: 91 dB/2.83Vrms/1 meter Nominal Impedance: 4 ohm Position in the room: away from corners

4.950,00 €*
Opera Grand Callas
Opera Grand Callas, große Standlautsprecher, A&V-Highlight !
Opera Grand Callas, große Standlautsprecher, A&V-Highlight !
Opera Grand Callas (Paarpreis) Die komplett neuentwickelte Grand Callas ist ein Drei-Wege-Standlautsprecher, der das lange Zeit bekannte Vorgängermodell ablöst.Klanglich auf dem Niveau einer Opera Tebaldi, ist sie aber aufgrund deutlich reduzierter Abmessungen flexibler und unkritischer in der Aufstellung. Daten und Abmessungen:Bass-Reflex Standlautsprecher mit zusätzlichen Hochtönern auf der Rückseite (Dipol)Scan Speak Hochtöner, Seas Mitteltöner und BässeEQ-Anpassung für BassberiechBelastbarkeit: 240 Watt (RMS)Terminals: BiWirungWirkungsgrad: 89 dB/1 Watt/1 MeterGröße: 30 x 130 x 55 cm (BxHxT)Gewicht: 79 KgThe new Callas speakers use techniques and components that represent the state of the art in electroacoustic, starting from the cabinet., the speakers and the crossovers. The result is tonally correct, realistic , engaging, and above all enjoyable to listen to. The new model Callas is an example of elegance and fits discreetly into any environment . Callas 2014 is a compact two-way loudspeaker (14 litres) of medium-small size which can be placed on a shelf or a stand . Its main feature is the low-frequency response, extended and controlled, combined with a typical sensitivity of froorstanding speakers. The woofer is a 7-inches, "long-throw", with annealed polypropylene diaphragm combined with the Scanspeak 9700 tweeter (the same used for Tebaldi, Malibran, Caruso and the new Grand Callas 2014) . The woofer is reflex loaded with a rear duct . Great care has been placed in the elimination of the internal reflections to ensure maximum transparency in the voice reproduction. Callas 2014 is equipped with a switch that allows you to adjust the output of the vocal range (+2 dB between 300 and 3000 Hz). This increases greatly the flexibility of the diffuser that fits both to a greater number of environmental situations . The new Callas produces a sound stage that expands in three dimensions with an excellent impulse response and power , dynamics and extension at low frequencies typical of systems of much higher dimensions . This speaker is also suitable for the "near field" listening (up to one meter to the listening point).

11.500,00 €*
Opera Mailbran
Opera Malibran, Referenz Standlautsprecher
Opera Malibran, Referenz Standlautsprecher
Opera Malibran, Referenz Standlautsprecher (Paarpreis) Der Opera Malibran ist der erste Lautsprecher der von Opera designt und von Unison Research produziert wurde. Die Malibran hat die Opera-Top-Entwicklungen wie das progressive Low-Pass-Filter, das CLD-System und das TEB-System für die 3 Tieftöner implementiert. Trotz ihrer Größe wirkt sie erstaunlich schlank und sehr elegant. Geradezu typisch ist die meisterliche Verarbeitung des edlen Kirschholzgehäuses und dem Lederbezug des Front-Panels Technische Daten  3-Wege (+ Rear-CLD-System) Drei 25 cm Tieftöner Vier 12 cm Mitteltöner Ein Front-Hochtöner mit Seiden-Kalotte und Dekompressions-Kammer Vier Hochtöner im rückwärtigen CLD-System Belastbarkeit: 750 Watt (RMS) Wirkungsgrad: 89 dB/1Watt/1Meter Größe: 39 x 140 x 80 cm (BxHxT) Gewicht: 125 kg

23.999,00 €*
Was Sie wissen sollten
Rote Plakate + leere Versprechungen... Wenn Sie wünschen, sind wir höchstwahrscheinlich die Billigsten. Wenn Sie billig wollen, senden Sie uns einfach eine Mail mit dem Ihnen vorliegenden "Mitbewerber"-Angebot und Sie werden von uns ein nettes Vergleichsangebot erhalten. Wir können auch billig. Wenn Sie von unserer Erfahrung und unserem Service profitieren wollen, sollten Sie aber nicht an Wunder glauben. Service ist Zeit und Zeit kostet Geld. Unsere Zauberkräfte haben Grenzen. Sie haben die Wahl: Den billigsten Preis mit Service nach den gesetzlichen Vorgaben oder einen für beide Seiten fairen Preis incl. ART&VOICE Service + Support. Senden Sie uns eine Nachricht >>>