Van den Hul MCS-150MS Tonarminnenverdrahtung Reinsilber! Der Preis ist für 4x 50cm Drähtchen. Klanglich kaum zu übertreffen und eine deutliche klangliche Aufwertung ihres hochwertigen Analoglaufwerkes!

Ortofon LW-7N Headshell Kabel Unsymmetrischer Kupfer-Hybrid-Aufbau bestehend aus: 3 Adern Ø 0,26mm sauerstofffreiem 7N-Reinkupfer (OFC 99,99999%) 16 Adern Ø 0,10mm sauerstofffreiem 6N-Reinkupfer (OFC 99,9999%) Konfektionierung: Rhodinierte Kontaktschuhe. Länge: 35mm

Van den Hul TAC - 5P Tonarmstecker Passend für Van den Hul D 502 HYBRID (und D - 501 HYBRID und D - 501 SILVER). Seine 5 Kontakte sind mit 24 Karat Gold über Silber über Kupfer überzogen. Die Anschluß-Kontakte mit Standard-270° Pin-Konfiguration sind in einer Teflon-Scheibe befestigt. Diese Scheibe kann in jedem beliebigen Winkel in Bezug auf das Verbindergehäuse eingestellt werden. Kabel werden durch Anziehen der hinteren Mutter dieser 3-teilige Konstruktion befestigt.  Technische Daten Van den HuL TAC 5P Farbe: schwarz Abmessungen der Kabelöffnung: 10,0 x 4,0 mm (B x H)

GERMAN HIGHEND LGS Reinsilberleiter, Meterware Die Reinheit des LGS-Silber liegt wie beim PSS bei mind. 4N eher 5N. Das Gefüge ist sehr homogen und die Kornform globular mit einzelnen polyedrischen Körnern. Die Kristallite sind etwa 6-8mal größer als die des PSS- Silbers. Dieser Größenunterschied wird durch einen sehr aufwändigen Glüh/Kühlprozess erreicht. Der Silberdraht wird bei einer Temperatur, unterhalb der Schmelztemperatur, mehrere Stunden geglüht. Das bis dato bestehende Gefüge verschwindet so vollständig. Beim anschließenden definiert langsamen Abkühlen kommt es zu einer völligen Korn- Neubildung. Deren Größe kann im Verhältnis zur Abkühlgeschwindigkeit in bestimmten Grenzen in Richtung größeres Korn beeinflusst werden. (langsameres Abkühlen = gröbere Körnung) Der Abkühlvorgang ist nicht linear, es müssen verschiedene Haltepunkt beachtet werden. Ist der Glühprozess abgeschlossen, wird der Draht auf Endmaß gezogen und poliert. Hier strecken sich die im Glühprozess sehr groß gewordenen Silberkristalle noch einmal deutlich in die Länge.

GERMAN HIGHEND PSS Reinsilberleiter, solidcore grobkristallin, Meterware Das verwendete Silber in der PSS-Serie hat eine Reinheit von 4 bis 5N . Die Gefügestruktur ist sehr homogen, die Kornform ehr globular. Die Restmetalle bestehen zum überwiegenden Teil aus Kupfer. Die Herstellung des PSS-Drahtes erfolgt maschinell, er wird direkt aus der Schmelze über Zugsteine auf Maß gebracht, geglüht und anschließend poliert.

Nordost Blue Heaven +, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. The fragile nature of the signals it carries demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer.The Blue Heaven Tonearm Cable + uses a twisted pair cable design to create a left and right channel, which are individually shielded in order to eliminate inter-channel crosstalk. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, which runs alongside the left and right channel to help minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable, silver-plated ground whips, complete with Micro Mono-Filament technology, to further enhance this groundbreaking cable. These ground whips completely eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4 x 28 AWG Construction: 2 Twisted pairs individually shielded Material: Silver plated 99.9999% OFC Solid Core Conductors Capacitance: 15.13pF/ft (49.5pF/m) Velocity of Propagation: 74% Overall Shield Coverage: 97% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Termination: MoonGlo® Straight or 90० low-mass 5-pin Din, RCA, or XLR connectors. Whips and bond wire terminated with gold-plated 5mm spades.

Nordost Heimdall 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer.The Heimdall 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Micro Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4 x 28 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Micro Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.46pF/ft (37.5pF/m) Velocity of Propagation: 76% Overall Shield Coverage: 97% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90° low-mass 5-pin din, RCA or XLR. Termination (Whips & Bond): Whips & bond wire terminated w/ gold-plated 5mm spades.

Nordost Tyr 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer. The Tyr 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Dual Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4x25 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Dual Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.12pF/ft (36.36pF/m) Velocity of Propagation: 78% Overall Shield Coverage: 98% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90० low-mass 5-pin Din, RCA, or XLR connectors. Whips and bond wire terminated with gold-plated 5mm spades.

Nordost Frey 2+, Tonarmkabel The tonearm lead is one of the most critical audio cables in an analog system. As such, it demands a purpose-built, low capacitance conduit, in order to maximize the authentic and natural musical reproduction that LPs offer. The Frey 2+ Tonearm Cable is virtually noiseless, with rapid transmission speed and the highest bandwidth capabilities, thanks to its twisted pair design, individualized shielding, and Nordost’s proprietary Dual Mono-Filament technology. It also employs a separately shielded, silver-plated bond wire, wrapped in Micro Mono-Filament, to minimize noise from the line. However, the most exciting aspect of this cable design is its revolutionary grounding solution. Nordost has introduced detachable ground whips, complete with Micro Mono-Filament technology, that further eliminate any noise that could be introduced during signal transfer, regardless of the unique construction of the components found in each individual sound system. Technical Details Insulation: Fluorinated Ethylene Propylene (FEP) Conductors: 4x26 AWG Construction: 2 Twisted pairs individually shielded. Mechanically tuned lay and lengths. Dual Mono-Filament design. Material: Silver plated 99.99999% OFC Solid Core Conductors Capacitance: 11.77pF/ft (38.5pF/m) Velocity of Propagation: 76% Overall Shield Coverage: 98% Bond / Grounding Whips: 24 AWG silver-plated, stranded OFC, Micro Mono-Filament design. Terminations: MoonGlo® Straight or 90° low-mass 5-pin Din, RCA, or XLR connectors. Terminations (Whips & Bond): Whips and bond wire terminated with gold-plated 5mm spades.